Use the EL168 1-Cell junction box for splicing or extending load cell cable. The PVC enclosure contains separate input and output cable fittings and no soldering, compression or swagged fittings are required.
Rice Lake's most economically priced simulator meets the needs of basic indicator troubleshooting and testing.
Protects against most adverse power conditions, including: frequency variations, surge, noise, blackouts, lightning, spike, brownouts.
Eliminates static for safe board replacement. Connects a field service technician and the static-safe work surface to the same ground ...
Portable design—no AC power required. Simple plug-and-play setup. Supports data transfer rates of more than 500 kbps
Cord grip assemblies made of weather- and corrosion-resistant nylon include cord grip, locknut, O-ring seal.
Provides greater safety than traditional suspension configurations. Complete package for ease of installation.
Threaded adapters are primarily used to couple isolators with load cells. Jam nuts are included for coupling.
Primary accessory for safeguarding ESD-sensitive components and circuits. Protects against electrostatic charges from the body
Provides total ESD protection for transporting ESD-susceptible products, whether locally or across long distances.
Two outlets, direct plug-in. LED indicator for power on. LED indicator for protection circuitry. UL1449 listed at 330 volts
Grounding straps are designed as an electrical grounding connection between two terminals. Tinned copper braid.
Suitable for use with leveling pads. Generic mounting plate for popular floor scales. Fits most floor scale foot assemblies
Heavy hex. Coupling nuts are long nuts used to connect pieces of threaded rod or other male threaded fasteners.
Constructed from durable 303 stainless steel for longevity and corrosion resistance. Designed to adapt conduit to load cells seamlessly.
Secures RoughDeck and other popular floor scales. Prevents movement in horizontal plane. Useful with SureFoot™.
Low cost, non-serviceable. Effective series protection. Encapsulated circuitry. Two nylon strain reliefs for 0.187 to 0.312
Mild steel or stainless steel. Assembly used in the ITCM. Adapts rod to rod-end ball joint. Elimination of unwanted side ...
Designed for use in weather-exposed or direct-burial locations. Each kit contains plastic splicing tube, circuit board, insulating resin.
Duplex receptacle. 20 ft ground cable. Factory serviceable. 9 ft cord with three-prong plug. Shielded line cord
JB8SP TuffSeal® signal trim junction box effectively seals in sensitive circuitry and resists potentially damaging elements.
Essential for every workbench, ensuring comprehensive ESD protection. Designed specifically for energized circuit work.
Design offers accurate point loading. Self-centering effect built in.Use with load cup and ball bearings to build a custom ...
Ranger 5 variable range simulator is a full-functioning simulator, well suited for more advanced troubleshooting and calibration needs.
Designed for a complete, professional transducer cable splice. Prevents moisture from entering the load cell through the cable connector. ...
JB1010 provides signal or excitation trim capabilities and provides easy access for trimming up to ten load cells per unit ...
RJ45 input and output connections. Five-inch Ethernet patch cable. Six-inch heavy gauge lead. Surge suppression utilizing high-speed.
Jumpers to enable/disable a load cell PreVent™ breather vent Conformal coated circuit board Number of cells: two, three, or four ...
Maintains usable 120 V nominal output. 1,200 watts output power rating supports heavy 120 V loads up to 10 ...
Ball bearings 52100 chrome alloy steel and are used with load cup and load receivers to build custom scales. ...
Suitable for use with compression mounting assemblies, canisters, S-beams and single-ended beams. Hardened alloy steel.
Designed for use with some floor scales or machinery platforms. Can limit vibrations transmitted to the scale through the ...
Bench scale feet are made with 1/4-20 UNC and 3/8-16 UNC threads. Rubber pad, 1/4-20 UNC threads. Stainless steel, 3/8-16 ...
Quick and secure cable connections with 5-Pin, 6-Pin, and 7-Pin MS-type connectors. Includes shell plugs and receptacles.
Designed to protect various printers from harsh washdown environments. Single lift-and-turn latch for easy access.
The JB4ES TuffSeal® excitation trim junction box sums two or four single load cell inputs with the potential to expand ...
iQUBE2 is ideal for systems using single or multiple scales with two or more load cells.
3 in overall height, all diameters. Stainless steel stem for corrosion resistance. Heavy-duty construction
Automatic overload protection. Convenient lighted on/off switches. Available in 70, 150 and 250VA outputs.
Dedicated series transient protection. Bidirectional design reduces noise on surrounding lines. Providing optimal protection for scales.
The EL204 signal trim junction box is a fit choice for summing two to four single cells in floor, hopper, ...
The JB4EP TuffSeal® excitation trim junction box sums two or four single load cell outputs with the potential to expand ...
Special chemical combination provides superior protection. Protects 5 cubic ft/1.4 cubic m of enclosure volume for approximately one year
The Ranger 3 variable range simulator is well suited for calibration needs, offering nine fixed intervals from -5 mV/V to ...
Designed for use in truck scale applications to prevent spillover into the pit. Impact, tear and weather-resistant SBR rubber.
Designed to protect various printers from harsh washdown environments. Single lift-and-turn latch for easy access
Stainless steel and carbon steel captured ball floor scale leveling feet provide outstanding accuracy, repeatability and performance.
Stainless steel, NEMA Type 4X enclosure Jumpers to enable/disable a load cell PreVent™ breather vent Conformal coated circuit board Number ...
The Ranger 7 is the simulator of choice for precision testing.
Power surges such as those caused by welding or electrical shorts frequently damage load cells and indicators.
Four outlets. Six-foot cord with grounded three-prong plug. Circuit breaker protected. UL1449 listed at 330 volts
JB1010ST junction box totals up to ten single load cells and includes transient protection inside
The EL304A signal trim junction box has a NEMA Type 4X, Fiberglass Reinforced Polyester (FRP) enclosure which provides optimal ...
Mild steel or stainless steel. Used in the ITCM assembly. One jam nut included with each rod end ball ...
JB8SPT TuffSeal® signal trim junction box with transient protection is the optimal choice for truck, livestock and railroad scales
For use with leveling pads One jam nut included Resources / Downloads Catalogs Leveling Pad Stems Catalog Page
Self-colored or hot-dip galvanized. Forged carbon steel quenched and tempered. Composed of forged carbon steel.
Optimize your load cell performance with a load cell spacer. Load cells require a flat mounting surface to perform correctly. ...
Transducer Simulator 4 is a fully functional simulator for replicating a wide range of load cell scenarios.
Replacement feet adapt to most floor scales. Available in mild steel or stainless steel. Simple swivel design.
Blind hole introduction. The Flintec low profile. Height adjustable by rotation. Includes spacer. Stainless steel.
Five outlets with battery backup and surge protection. UPS and Surge Protection. Replaceable battery. Data Line Protection
Apple iOS, Android and Windows Mobile connectivity. Direct thermal printing of bar codes, text and graphics
Made from drop-forged steel for enhanced durability and strength. Designed to maximize safe load capacity, supporting up to 15,500 ...
Two 5-15R outlets. Convenient on/off switch. Transistorized and solid state for long life and quiet operation
Strain relief cable fittings Removable connectors for easy wiring Number of cells: two or four single cells (even number of ...
A bolt with a circular ring on the head end. Can be used in conjunction with connecting links to suspend ...
