JB8SPT TuffSeal® Signal Trim Junction Box
JB8SPT TuffSeal® signal trim junction box with transient protection is the optimal choice for truck, livestock and railroad scales
JB8SPT TuffSeal® signal trim junction box with transient protection is the optimal choice for truck, livestock and railroad scales
Two outlets, direct plug-in. LED indicator for power on. LED indicator for protection circuitry. UL1449 listed at 330 volts
Threaded adapters are primarily used to couple isolators with load cells. Jam nuts are included for coupling.
Mild steel or stainless steel. Used in the ITCM assembly. One jam nut included with each rod end ball joint
The EL304A signal trim junction box has a NEMA Type 4X, Fiberglass Reinforced Polyester (FRP) enclosure which provides optimal protection
Four outlets. Six-foot cord with grounded three-prong plug. Circuit breaker protected. UL1449 listed at 330 volts
Blind hole introduction. The Flintec low profile. Height adjustable by rotation. Includes spacer. Stainless steel.
Spherical washer sets are available in various sizes and dimensions.
Quick and secure cable connections with 5-Pin, 6-Pin, and 7-Pin MS-type connectors. Includes shell plugs and receptacles.
JB1010 provides signal or excitation trim capabilities and provides easy access for trimming up to ten load cells per unit or conveniently adjust multiple cell
Duplex receptacle. 20 ft ground cable. Factory serviceable. 9 ft cord with three-prong plug. Shielded line cord
